Aluminium Pin for ACE shaft

0 Rating
1,30 €
In Stock
SKU: PINACE001.1
Prezzo per singolo pezzo.
Quantità minima ordinabile 12 pezzi.
 Back to: Pin and inserts

Compatible Shafts

Easton
ACE 370 , ACE 400 , ACE 430 , ACE 470 , ACE 520 , ACE 570 , ACE 620 , ACE 670 , ACE 720 , ACE 780 , ACE 850 , ACE 920 , ACE 1000 , ACE 1250

Description

Aluminium Pin for ACE shaft.

This Pin is designed to be installed on Easton ACE rods, having a 4.27 mm stem diameter allowing it to be installed without using glue but by inserting it applying pressure.

This way, we are sure that the Pin will always remain stable and straight, avoiding that the glue can give in and let it move. In fact, the Pin is the component that supports all the thrust applied when the arrow strikes therefore it should be as stable as possible.

To improve the adhesion of the glue, if you want to add some, the Pin has a crossed knurling on the specially designed stem.

The collar has a base diameter of 5.25 mm to be slightly inside the shaft and not to affect the shooting. While, at the end side, the 4.5 mm diameter  provides a suitable base for the nock.

The tang of the Pin has a diameter of 3.25 mm which ensures the correct fixing for the nock, also it has the conical end to adhere perfectly to it.

All Pin Tipping Points are made of aerospace aluminium alloy which provideas very high quality in terms of hardness and compactness.

 

Product Specifications

Type:
Glue-In
Internal diameter (mm):
4,27
Collar diameter (mm):
5,25
Material:
Aluminum

Reviews

There are yet no reviews for this product.