Aluminium Pin for Cross-X Plurima X10

0 Rating
1,40 €
1,30 €
You save:
0,10 €
In Stock
Prezzo per singolo pezzo.
Quantità minima ordinabile 12 pezzi.
 Back to: Pin and inserts

Compatible Shafts

Plurima 500 , Plurima 550 , Plurima 600
X10 380 , X10 410 , X10 450 , X10 500 , X10 550 , X10 600 , X10 650 , X10 700 , X10 750 , X10 830 , X10 900 , X10 1000 , X10 Protour 380 , X10 Protour 420 , X10 Protour 470 , X10 Protour 520 , X10 Protour 570 , X10 Protour 620 , X10 Protour 670 , X10 Protour 720 , X10 Protour 770


Aluminium Pin for Cross-X Plurima and Easton X10 X10 Pro-Tour shaft.

This Pin is designed to be installed on Plurima and Easton X-10 Cross-X shafts. Having 3.21 mm diameter stem, we are sure that the Pin will always remain stable and straight.

In fact, the Pin is the component that supports all the thrust applied when the arrow strikes and for this it should be as stable as possible.

To improve the adhesion of the glue, the Pin has a crossed knurling on the specially designed stem.

The collar has a base diameter of 5.00 mm to be slightly inside the shaft and does not affect the shooting, while at the end side the diameter is 4.5 mm to provide a suitable base for the nock.

The tang of the Pin has a diameter of 3.25 mm which ensures the correct fixing for the nock, also it has a conical end to adhere perfectly to it.

All Tipping Points Pins are made of aerospace aluminium alloy which provides very high quality in terms of hardness and compactness.


Product Specifications

Internal diameter (mm):
Collar diameter (mm):


There are yet no reviews for this product.